Annonce de rappel des produits ACU-150 et ACU-400
En savoir plusFirmware update processes are done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.
If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.
By Downloading the software, you agree to these terms.
Version | Release Date | Features |
v2.50 App 1.18 W3 | Dec 2022 | Feature Improvements
Resolved Issued & Improvements
|
v2.48 App | Jan 2022 | Production release only – contains no end user performance changes or enhancements |
v2.46 App | Nov 2021 |
|
v2.44 App | Dec 2019 |
Note: From time-to-time electronic components used to manufacture Raymarine products go out of production and are replaced with newer equivalents. This release addresses such a component change and is compatible with both newly manufactured and existing Quantum 2 systems. |
v2.43 App v1.62 PSU v2.28 FPGA v1.17 W3 | Oct 2018 |
|
v2.36 App v1.56 PSU v2.28 FPGA v1.04 W3 v1.56 UpMan | April 2018 |
|
This FAQ relates to the following products:
The Quantum, CP100, CP200, CP370, CP470 & CP570 can be upgraded via any of the following Multifunction Displays (MFD):
Note: microSD memory cards used with a/c/e/eS/gS Series MFDs should have a memory capacity of no less than 512MB and no more than 32GB.
Note: To avoid potentially corrupting the data on your Navionics chart card, DO NOT copy software update files to your Navionics chart card and DO NOT back up waypoint/route/track data to your Navionics chart card. MicroSD cards are commonly available in most stores selling consumer electronics products. Waypoint, route, track data, and system configuration data can be stored on a microSD memory card which also contains software update files.
The Radar, SONAR module software is now part of the latest a, c, e, eS, gS Series Multifunction Display (MFD) software download. It contains the following peripherals:
Once the Master MFD has updated, any connected MFD or peripheral will be updated as well.
If you have performed the MFD update recently you may not need to perform this update. Please check if you require the update.
The MFD's and peripherals software version may be verified via the command sequence:
[Homescreen] > Setup > Maintenance > Diagnostics > Select Device
If you have issues performing the software update please contact your local Raymarine agent who will be able to assist.